成人精品视频,久久AV老女人综合网,亚洲中文无码一级a,国产又黄又爽又刺激的免费网址,天天av天天翘天天综合网

Product introduction

Application of W9-26 high temperature centrifugal fan:

high-temperature gas that
is non-corrosive, non-spontaneous, and the maximum temperature does not exceed 700 °C . The dust and hard particles contained in the medium are not more than 150 mg/㎡. 

W9-26 high temperature centrifugal fan structure:
the fan is composed of impeller, casing, air inlet, transmission group and other components, and is equipped with an adjusting door.

1. The impeller has 12 forward curved blades.

2. The air inlet has a convergent and streamlined overall structure, and is connected to the front cover group with bolts.

3. The casing is made of low-alloy steel plate.

4. Transmission group, composed of main shaft, water-cooled bearing box, coupling, etc.

Type of W9-26 high temperature centrifugal fan:

1. This series of fans are single-suction type, with three machine numbers of 5, 8, and 12.5, and the transmission modes of the fans are: C, D, and F types.

2. This series of fans can be made into two forms of right-handed and left-handed. When viewed from the front of one end of the motor, the impeller rotates clockwise and is called a right-handed fan, which is represented by "right"; when it is rotated counterclockwise, it is called a left-handed fan, which is represented by " Left" means.

3. The outlet position of the fan is indicated by the outlet angle of the casing. "Left" and "right" can be made into 6 angles of 0°, 45°, 90°, 135°, 180°, and 225°.

Performance parameters of W9-26 high temperature centrifugal fan